KNOG - přední blikačka Blinder MOB černá

KNOG - přední blikačka Blinder MOB černá
Chyba při zobrazování komponenty 'PPTable'

No of LEDs: 4 

Lumens: 80 (LED Rating) 

Beam Angle: 35°

Dimensions: 42 x 42 x 16mm (main body) 

Weight: 35g 

Straps:Replaceable straps for tool-less attachment, 1 x Small (22 - 27mm) 1 x Medium (27-32mm) 

Visibility: Light is visible at over 1000 metres 

Light Modes: 5 light modes 

Run Time: Blinder MOB front lasts upto 2.5 hours in Steady High mode, 5.5 in Steady Low, 4 hours in Strobe Flash, 4-6hours in Fancy Flash and 50-60 hours in Eco Flash. 

Battery: Rechargeable Lithium polymer battery via integrated USB plug. 

Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). 

Charge Type:via integrated USB plug. Waterproof, tough and can be plugged in directly - no need for cable. 

Charge Time: 5hrs 

Storage Mode:Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn?t being used. Refer to the instructions online. 

100% Waterproof: The Blinder MOB is IP67 Tested and 100% waterproof against all elements 

Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Polycarbonate Optical grade PMMA Lens, Hard-Anodised aluminium fascia and plastic latch. USB Rechargeable Lithium Polymer Battery (USB). This saves using about 600 AAA Alkaline batteries during the light?s lifetime. 

LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride.

Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.

Testing: The Blinder MOB has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE Certification.